What is Azure ExpressRoute?
ExpressRoute is an Microsoft Azure service that lets you create private connections between Microsoft datacenters and infrastructure that’s on your premises or in a colocation facility. ExpressRoute connections do not go over the public Internet, and offer higher security, reliability and speeds with lower latencies than typical connections over the Internet.
How to setup ExpressRoute Circuit?
ExpressRoute circuits are resources within Azure subscriptions. But before you setup Expressroute connection (or circuit as it’s normally referred as), you need to make decisions about setup parameters.
1) Connectivity Option – You can establish connection with Azure cloud either by extending your MPLS VPN (WAN), or you can leverage your Colocation provider and it’s cloud exchange or roll out an point-to-point ethernet your self. Most large enterprises would use the first option, medium size enterprise running in COLO would go with second option, and the last is more specialized scenario warranting higher level security
2) Port Speed – Bandwidth for your circuit
3) Service tier / SKU – standard or premium (more on this later)
4) Location – You might get multiple options for this depending on your choice for connectivity (#1). E.g. MPLS providers have multiple peering locations from which you can pick the one closet to you
5) Data Plan – Limited plan with pay as you go egress charges or unlimited plan with higher cost irrespective of egress volume
After you make these five choices, you can fire up PowerShell on your VM to execute ‘New-AzureDedicatedCircuit’. Remember to select the right Azure subscription (Add-AzureAccount / Select-AzureSubscription) where you want the circuit to be created. Please note you would need to import ExpressRoute module if not already (Import-Module ‘C:\Program Files (x86)\Microsoft SDKs\Azure\PowerShell\ServiceManagement\Azure\ExpressRoute\ExpressRoute.psd1’
New-AzureDedicatedCircuit -CircuitName $CircuitName -ServiceProviderName $ServiceProvider -Bandwidth $Bandwidth -Location $Location -sku Standard
As soon as this completes you will get a service key which is kind of a unique identifier for your circuit. At this step only your billing starts, as we have only completed Azure side of things. Now you need to work with your Network Service Provider, provide your service key and ask them to complete their side of configuration to Azure. This would also involve setting up a BGP session at your end. Once this done you are all set to leverage expressroute and connect the circuit to azure virtual networks – with the traffic flowing over private connection.
Connecting ExpressRoute Circuit to Azure Virtual Network
Once the circuit is configured it’s relatively straight forward to connect it to virtual network. Once again PowerShell is your friend. But before firing the below command ensure your VNET and the virtual gateway is created.
New-AzureDedicatedCircuitLink -ServiceKey “***” -VNetName “MyVNet”
ServiceKey parameter uniquely identifies your circuit. As circuits are part of the Azure Subscription (wish there was a way to view them in portal) your VNET should be part of the same subscription. This lead to the question – Can we connect expressroute circuits to VNETs across subscriptions? Answer is yes.
Connecting ExpressRoute Circuit to Azure Virtual Network across subscriptions
As we know circuit is part of a subscription, so as a subscription admin you will have to grant rights to other subscription admins so that they can link their VNETs to your circuit. Here’s the PowerShell cmdlet to do that.
New-AzureDedicatedCircuitLinkAuthorization -ServiceKey “***” -Description “AnotherProdSub” -Limit 2 -MicrosoftIds ‘email@example.com’
This commands allows 2 VNETs from AnotherProdSub to connect to the ExpressRoute circuit. You might see the last parameter MicrosoftId replaced by AzureAD Id (not sure what IDs are supported right now)
Once you have the authorization, you can query the servicekey from your subscription and link your VNET as appropriate.
Get-AzureAuthorizedDedicatedCircuit #This will get details of the circuit including ServiceKey
New-AzureDedicatedCircuitLink –servicekey “***” –VnetName ‘APSVNET’ #Link VNET in another subscription
Remember you can only connect 10 VNETs per circuit. Though this is a soft limit but you can grow only few folds. If you need to create 100 VNET instance you need to look at ExpressRoute Premium.
What is ExpressRoute Premium?
Premium tier for enterprises that need more VNETs per circuit, need their circuit to span geo-political region or have more than 4000 route prefixes. You will pay around 3000 USD more for the premium features, when compared to standard edition with same bandwidth.
How much it costs?
Express route costs boil down to price you pay to Microsoft and your service provider.
To Microsoft it’s
monthly fee depending on the port speed
Bandwidth consumed (unless you are in unlimited data where you flat 300 USD)
Virtual Gateway which you would provision in your VNET (mandatory for expressroute & S2S VPN)
To Network Service Provider:
It’s one time setup fee for the circuit
Bandwidth charges (how much data goes through their cloud to Microsoft)
How long does it take to setup connection?
Well it depends. If you already have a network service provider or an exchange provider supporting Azure, it shouldn’t take more than a day (excluding paperwork). Otherwise this can turn out to be a project in itself.
Can we use ExpressRoute to connect to office 365?
Answer is yes, but it actually depends on your provider. Apart from connecting to Azure VNET, expressroute allows you to establish public peering and Microsoft peering to route your Azure PaaS (public services) and Office 365 traffic over the private network. For more details refer to this link. Public peering allows you to route your traffic to public services like Azure Services and Azure SQL database over private tunnel.